-
-
-
-
-
-
(5)
62/68/12 Dodge 5.9 Cummins Turbo for CR 2003 - 2007
Add to Cart The item has been added$1,389.00 -
-
-
-
-
-
3rd Gen 5.9 Cummins | 2003 – 2007
3rd Gen 5.9 Cummins Upgrades (2003–2007)
Reliable power and strong towing performance for the 2003–2007 Dodge/Ram 5.9L Cummins (common-rail). Diesel Power Source turbos, exhaust manifolds, and install hardware improve spool, airflow, and grade control while protecting everyday drivability.
This page highlights third-gen 5.9L fit notes and upgrade paths. If you need 12-valve, 24-valve (’98.5–’02), or 6.7L parts, use the links below. Detailed specs, year breaks, and exact kit contents are listed on each product page.
Why upgrade your 2003–2007 5.9 Cummins
- Stronger towing & midrange: Flow-optimized manifolds and right-sized chargers help hold speed on grades with lower EGT.
- Quicker spool: Efficient collectors and clean hot-side routing improve low-rpm response for street and tow manners.
- Durability: Thick-wall castings with flat-machined flanges resist warping and leaks through repeated heat cycles.
- Clean fitment: Components modeled around 3rd-gen bay clearances for service access and repeatable installs.
What makes the 2003–2007 5.9L a favorite to modify
The common-rail 5.9L blends strong internals with responsive fueling, so airflow upgrades translate into real-world gains. A high-flow manifold and correctly matched S300/S400 single—or a compound-over-stock path—let you tow steadier, run cooler, and add power without giving up drivability.
Improving fuel efficiency on a 3rd gen 5.9L
Efficiency comes from operating the turbo in its sweet spot. A smoother manifold and properly sized turbo lower drive pressure and help combustion under load. Pair with a healthy intercooler system and proper maintenance to see steadier mileage on highway and tow routes.
How to choose parts for a 3rd gen 5.9
- Towing & daily: Stock-replacement or T3/T4i performance manifold with a quick-spooling S300-class turbo. Monitor EGT on first towing runs.
- Street performance: Mid-size S300 or compact S400 with the right turbine A/R to hold speed on grades without excessive lag.
- Higher-fuel builds: Larger airflow with freer housings and adequate intercooling; plan converter, gearing, and brakes for target power.
Fitment checklist for 2003–2007
- Confirm T3 vs T4/T4i manifold flange for your turbo choice.
- Verify downpipe route, intercooler path, and clearance at steering shaft, heater box, and A/C lines.
- Plan fresh gaskets, quality hardware, heat shielding, and ports if logging EGT or drive pressure.
Install & first-drive notes
- Use new gaskets and quality hardware; torque in sequence on a cold engine.
- Pressure-test the charge-air system before first start; check for any pre-turbine leaks.
- Monitor boost and EGT on shakedown; re-check fasteners after heat cycles if specified.
Shopping related categories? 5.9 Cummins Manifolds (12V, 24V, CR) | S300 Single Turbos | S400 Single Turbos | Add-A-Turbo (Compound-Over-Stock) Kits. For other engines, see 2nd Gen 24V (1998.5–2002) or 6.7 Cummins Manifolds (2007.5–2024).
Frequently asked questions
Do I need tuning after a manifold swap on a 3rd gen
A manifold alone typically doesn’t require tuning. If turbo size or fueling changes, calibration can optimize response and shift strategy.
Will a performance manifold lower tow temps
Yes. Lower drive pressure and smoother flow usually reduce EGT on long pulls and help the turbo stay in an efficient range.
T3 vs T4/T4i on a 3rd gen 5.9
Choose T3 for most stock-frame or quick-spool goals. Move to T4/T4i when stepping up airflow for future headroom or larger single/compound setups.
Is compound required for towing
Not required, but compounds provide the widest efficiency window for heavy GCW, elevation, or heat—keeping response strong and EGT controlled.
