Skip to content
Diesel Power Source
DPS 2-piece Fummins exhaust manifold for Ford Cummins conversion 12V 5.9
DPS 2-piece Fummins exhaust manifold with upgraded hardware kit
DPS 2-piece Fummins exhaust manifold for Ford Cummins conversion
Ford Cummins conversion 12V 5.9 exhaust manifold
Ford Cummins conversion 12V 5.9 exhaust manifold 2 piece

DPS T3 Manifold for 12V Fummins, Chummins, RV & Bus | Clears Heater Core | CARB Exempt

Diesel Power Source

SKU: MAN0170·MPN: MAN0170

$499.00
Upgrades
1

T3 Exhaust Manifold for 12V Cummins | Fummins, Chummins, RV, Bus & Industrial | Clears Heater Core

The Diesel Power Source® T3 exhaust manifold for 12V Cummins swap, RV, bus, and industrial applications is a performance 2-piece manifold specifically designed to place the turbo low and to the rear of the engine, clearing the heater and AC core on Ford Cummins (Fummins) conversions, Chevy Cummins (Chummins) swaps, and other non-Dodge applications where the standard Dodge Ram turbo location creates clearance problems.

This manifold fits all 1988–1998 Cummins 5.9L 12-valve engines with T3 flange turbochargers. It is cast from high-nickel ductile iron, CFD designed for improved exhaust flow and turbo spool-up, and features expansion joints to prevent cracking. This manifold is CARB exempt with an Executive Order (EO) number.

Why This Manifold Instead of the Standard 12V Manifold

The standard DPS T3 manifold for 12V Cummins is designed for Dodge Ram trucks where the factory turbo location has adequate clearance. In Fummins and Chummins swaps, the Ford or Chevy engine bay places the heater core and AC components on the passenger side of the engine compartment, directly in the path of a standard turbo mount. RV, bus, and industrial installations often have similar clearance constraints.

This manifold solves that problem by positioning the turbo flange low and to the rear, in the 3rd gen or industrial turbo location. This clears the heater/AC core on Ford and Chevy chassis while maintaining proper exhaust flow to the turbocharger. If your 12V Cummins is in a Dodge Ram truck, use the standard 12V T3 Manifold instead.

Applications

  • Ford Cummins Swap (Fummins) — F250, F350, Excursion, and other Ford trucks with 12V Cummins conversions. Clears Ford heater core and AC components. Compatible with Ford 7.3 to Cummins conversion kits.
  • Chevy Cummins Swap (Chummins) — Silverado 2500HD, 3500HD, and other GM trucks with 12V Cummins swaps. Clears GM chassis constraints including steering, crossmember, and heater core.
  • RV and Motorhome — Cummins-powered motorhomes and RVs where the turbo needs to clear auxiliary systems and coach components.
  • School Bus and Commercial Bus — Bus applications with the 5.9L 12V Cummins.
  • Industrial and Marine — Non-automotive 12V Cummins applications where turbo placement requires a low-rear mounting position.

Specifications

Specification Value Design 2-piece with expansion joints Material High-nickel ductile iron Turbo Flange T3 Turbo Position Low and rear (3rd gen / industrial location) Coating Black high-temperature ceramic (1,400°F rated) CARB Status Exempt (EO numbered) Fitment All 1988–1998 5.9L 12V Cummins with T3 turbo

Key Features

  • Clears Heater/AC Core — Turbo mounts low and rear, solving the #1 clearance issue on Fummins and Chummins swaps
  • 2-Piece Expansion Joint Design — Prevents cracking from thermal cycling
  • CFD Designed — Improved exhaust flow and turbo spool-up over factory manifolds
  • High-Nickel Ductile Iron — Handles extreme heat with minimal expansion
  • CARB Exempt (EO Numbered) — Legal for use in California
  • T3 Flange — Compatible with DPS S300 turbos, factory turbochargers, and most aftermarket T3 turbos
  • Fits All 12V Applications — Ford swaps, Chevy swaps, RV, bus, motorhome, industrial
  • Ceramic Coated — High-temperature black ceramic finish

What's Included

  • DPS 2-piece T3 rear-mount exhaust manifold for Fummins, Chummins, RV, and bus 12V Cummins applications
  • Black high-temperature ceramic coating

Optional upgrades:

  • Complete Hardware & Gasket Kit — adds the MLS manifold gaskets, stud-and-nut mounting hardware, and T3 turbo install components for stock-style or aftermarket S300 turbos.

Installation Notes:

  • Rear-mount turbo position designed to clear heater cores on Ford and Chevy Cummins swap chassis — does not fit Dodge Ram trucks (use MAN0127 instead).
    Hardware in the upgrade kit fits both stock-style turbos and aftermarket S300-style T3 turbos.
    The DPS manifold is thicker than the stock manifold, so the Complete Hardware & Gasket Kit is recommended for proper turbo mounting depth — included if you select the upgrade above.

Black High-Temperature Coating

DPS exhaust manifolds are finished with a high-temperature black ceramic coating designed to handle extreme heat and real-world diesel performance conditions. This coating is rated for sustained temperatures up to 1,400°F, helping reduce surface heat, improve durability, and maintain a clean appearance under normal operating conditions.

Please note: The black ceramic coating is rated for temperatures up to 1,400°F. If exhaust gas temperatures exceed approximately 1,470°F, the coating may discolor and shift to a gray appearance. This is a normal result of excessive heat exposure and does not affect the performance or structural integrity of the manifold. Warranty does not cover coating discoloration or finish changes due to high EGT conditions.

About the Manifold Joint Seal

Every DPS multi-piece manifold uses a hard, metal-to-metal press-fit seal at each joint — no gasket. The seal tightens through thermal expansion and performs best at driving temperatures (750°F and higher). Minor leakage at cold or idle is normal and expected on any joint-style manifold and is not a sign of a defective part.

Every manifold is pressure-tested leak-free at room temperature before it leaves our facility. For a full explanation of how the seal works, why soapy-water idle tests aren't a valid diagnostic, and how the multi-piece design outlasts single-piece manifolds, see:

Understanding DPS Multi-Piece Exhaust Manifolds →

OEM Cross-Reference (RV, Bus, and Industrial)

For RV, bus, and industrial applications, this manifold may replace the following OEM part numbers:

  • 3931747
  • J901683
  • J931747

Always verify fitment with your specific application before ordering. Contact Diesel Power Source® if you need help confirming compatibility.

Fitment

This manifold fits all 1988–1998 Cummins 5.9L 12-valve engines with T3 flange turbochargers in non-Dodge applications where the turbo needs to clear heater/AC components or mount in a low-rear position. Specifically designed for Ford Cummins (Fummins), Chevy Cummins (Chummins), RV, bus, motorhome, and industrial installations.

Have a Dodge Ram truck? Use the standard 12V T3 Manifold for Dodge Ram instead. This Fummins/RV manifold has a different turbo position that is designed for swap and non-Dodge applications.

Related Fummins and Chummins Products

You may also like