6.7L Cummins EGR Plate Kit | 4G \& 5G
The Diesel Power Source® 6.7L Cummins EGR Plate Kit includes the two block-off plates needed to seal the EGR ports on the DPS 4G T4i and 5G exhaust manifolds when the truck's EGR system has been removed. The kit pairs with both the DPS 4G T4i 6.7L Exhaust Manifold (MAN0140) and the DPS 5G 6.7L Exhaust Manifold (MAN0179).
For previously deleted trucks only. DPS does not provide delete components Buyer is responsible for compliance with all applicable laws.
What This Kit Does
The 6.7L Cummins exhaust manifold has two EGR ports — a large port where the EGR cooler bolts to the manifold, and a smaller port for the EGR feed line. When a truck's EGR system is removed for off-road use, both ports need to be sealed so exhaust gas exits only through the turbocharger. This kit includes both block-off plates sized to fit the DPS 4G T4i and 5G manifolds.
Who This Kit Is For
- Builders installing the DPS 4G T4i (MAN0140) or 5G (MAN0179) exhaust manifold without EGR
- Owners of 2007.5–2018 or 2019–2024 6.7L Cummins trucks.
What's Included
- 1 × Large Plate — Seals the EGR cooler mounting port on the manifold
- 1 × Small Plate — Seals the secondary EGR feed port on the manifold
Key Features
- Fits both 4G T4i and 5G manifolds — one kit covers MAN0140 and MAN0179 applications
- Direct bolt-on — uses existing manifold mounting points, no machining required
Fitment
- 2007.5–2018 Dodge Ram 2500 / 3500 pickup — 6.7L Cummins (4G), paired with MAN0140
- 2019–2024 Dodge Ram 2500 / 3500 pickup — 6.7L Cummins (5G), paired with MAN0179
Pairs With This Kit
- DPS 4G T4i 6.7L Exhaust Manifold (MAN0140) — for 2007.5–2018 Ram trucks
- DPS 5G 6.7L Exhaust Manifold (MAN0179) — for 2019–2024 Ram trucks
- 4G T4i Manifold Hardware & Gasket Kit — full install hardware for MAN0140
- 5G Manifold Hardware & Gasket Kit — full install hardware for MAN0179
- All Diesel Power Source® Exhaust Manifolds
Frequently Asked Questions
Yes. The kit includes the large and small block-off plates sized to fit both the DPS 4G T4i Exhaust Manifold (MAN0140) and the 5G Exhaust Manifold (MAN0179). One kit covers either application.
No. Mounting hardware for the block-off plates comes in the DPS hardware and gasket kits (GAS0133 for 4G, GAS0152 for 5G). If you are not using a DPS hardware kit, use new mounting hardware. We do not recommend reusing the factory EGR hardware, because it has been through the same heat cycles as the old manifold.
No. This kit is only needed when the EGR system has been removed for off-road use. If you're keeping the factory EGR cooler in place, the hardware to reattach it is included in the GAS0133 or GAS0152 hardware kit.
