Skip to content
Diesel Power Source
DPS T4 exhaust manifold for 6.7 Cummins 2007.5-2018 2G swap with EGR ports
DPS T4 exhaust manifold for 6.7 Cummins 2007.5-2018 2G swap
6.7 Cummins T4 center mount manifold showing T4 flange and EGR port locations
DPS 2-piece T4 manifold for 6.7 Cummins aftermarket S400 turbo 2G swap NOT OEM
6.7 Cummins manifold aftermarket S400 turbo 2G swap NOT OEM
End view of the 6.7 Cummins T4 2G swap exhaust manifold showing the T4 turbo flange
Read the reviews

DPS T4 Exhaust Manifold for 6.7 Cummins 2007.5-2018 *NOT OEM | 2G Swap

Diesel Power Source

SKU: MAN0126·MPN: MAN0126

$449.00
1

T4 Exhaust Manifold for 6.7 Cummins 2007.5-2018 | 2G Swap | Center Mount | NOT OEM

Important: This is NOT an OEM manifold. This T4 manifold is designed for aftermarket T4-flange turbochargers only. It will NOT fit the factory HE351VE or HE300VG turbo, which uses a T4i flange. If you need a stock replacement manifold for your factory turbo, see the T4i Stock Replacement Manifold for 6.7 Cummins.

The Diesel Power Source® T4 exhaust manifold for 2007.5-2018 Dodge Ram 6.7 Cummins is a high-flow, 2-piece performance manifold designed specifically for 2nd gen (2G) swap applications. This manifold mounts aftermarket T4-flange turbochargers, such as S300 (T4 config) and S400 turbos, in the factory turbo location, bolting directly to the 6.7 Cummins exhaust. It includes EGR ports for emissions compatibility or external wastegate use, and lowers rear cylinder EGTs by up to 200°F.

This manifold is for 6.7 Cummins owners who are upgrading from the factory VGT turbo to a larger aftermarket T4-flange turbocharger for increased performance, towing capability, or compound turbo builds. If you are keeping your factory turbo, you do not need this manifold.


What Makes This Different from the T4 Center Mount (1998.5-2018)

The DPS T4 center mount manifold (MAN0129) is designed for 5.9L 24V and 6.7L applications with a universal 2nd gen center-dump design. This 6.7-specific T4 manifold (MAN0126) is purpose-built for the 6.7 Cummins engine with features the center mount does not have:

  • EGR Ports: Includes exhaust gas recirculation ports for emissions compatibility or external wastegate setups
  • Sensor Ports: Drilled and tapped for 6.7-specific pyrometer and pressure sensor locations
  • Factory Location Mounting: Turbo mounts in the factory turbo location to bolt directly to the 6.7 Cummins exhaust system
  • 6.7 Head Bolt Pattern: Matched to the 6.7L ISB head

If you have a 1998.5-2007 5.9L Cummins, use the T4 Center Mount Manifold instead.


Who Needs This T4 Manifold

This manifold is required when upgrading the 6.7 Cummins from the factory VGT turbo to an aftermarket turbo with a T4 inlet flange. Common applications include:

  • 2nd Gen (2G) Swap: Replacing the factory VGT with a 2nd gen-style turbo and manifold layout using S300 or S400 T4-flange turbochargers
  • S400 Single Turbo Builds: S467, S472, S475, S480, and similar large-frame turbos
  • Compound Turbo Setups: As the manifold for T4-flange high-pressure turbos in twin turbo configurations
  • High-Horsepower Builds: Applications where the factory T4i manifold and VGT turbo cannot support the airflow demand

If you are keeping your factory turbo, doing a 3rd gen swap (which includes its own manifold), or using a T3-flange turbo, this is not the right manifold for your build.


Why the DPS T4 Over Steed Speed or Other Competitors

The DPS 6.7 T4 manifold is cast from high-nickel ductile iron with a 2-piece expansion joint design. This matters for two critical reasons:

  • Stainless steel manifolds (including Steed Speed) expand and contract up to 2x more than ductile iron. That extra movement transfers stress into the cylinder head, head bolts, and gaskets, leading to leaks and failures.
  • DPS CFD-tested runner geometry maintains exhaust gas velocity through properly sized runners. Competitor manifolds with oversized runners actually slow exhaust velocity, causing a bottleneck at the turbo flange. DPS has tested competitors that lost 40 HP on a 400 HP truck due to oversized runner designs.

The DPS manifold flows more air than the Steed Speed 6.7 Cummins manifold while using optimized runner sizing that works with the turbo rather than against it.


Key Benefits

  • Lower Drive Pressure and EGTs: Reduced restriction lowers exhaust backpressure and drops rear cylinder EGTs by up to 200°F
  • Turbocharger Flexibility: T4 flange accepts S300 (T4 config), S400, and other large-frame aftermarket turbos
  • Faster Turbo Spool: CFD-tested runner geometry delivers exhaust energy efficiently for improved throttle response
  • EGR Ports Included: Compatible with emissions equipment or external wastegate setups
  • Factory Turbo Location: Bolts to the 6.7 Cummins exhaust system, keeping the turbo in the factory position
  • Crack-Resistant 2-Piece Design: Expansion joint handles thermal cycling without the cracking that destroys factory and single-piece manifolds
  • Center Mount Position: Turbo mounts in the center (2nd gen) position for optimal exhaust routing

Specifications

Specification Value
Design 2-piece with expansion joint
Material High-nickel ductile iron
Turbo Flange T4 (center mount)
EGR Ports Yes, for emissions or external wastegate
Rear Cylinder EGT Reduction Up to 200°F
Coating Black high-temperature ceramic (1,400°F rated)
Pyrometer / Sensor Ports Drilled and tapped (two sizes)
CARB Status Not CARB certified
OEM Replacement No, this is NOT an OEM replacement
Included Hardware 6 new gaskets and two bolts
Fitment 2007.5-2018 6.7L Cummins with aftermarket T4 turbo

This T4 vs the T4i Stock Replacement: Which Do You Need?

Feature T4i Manifold (Stock Replacement) T4 Manifold for 2G Swap (This Product)
Turbo Flange T4i (fits factory HE351VE / HE300VG) T4 (fits aftermarket S300 T4, S400, large-frame turbos)
Factory Turbo Compatible Yes No, aftermarket T4 turbos only
EGR Ports Yes Yes
Best For Stock replacement, towing, daily driving with factory turbo 2G swaps, S400 builds, compounds, high HP
CARB Status Contact DPS Not CARB certified
Turbo Position Factory location Center mount (2nd gen position) in factory location

What's Included

  • DPS 2-piece T4 center-mount exhaust manifold for 4G 6.7 Cummins (with EGR ports, 2nd-gen swap configuration)
  • Black high-temperature ceramic coating
  • T4 divided turbo flange gasket and oil drain gasket
  • 6 × multi-layer manifold-to-head gaskets
  • Stud-and-nut manifold-to-head mounting hardware
  • T4 turbo flange mounting hardware
  • Large and small EGR block-off plates (for emissions-deleted trucks)
  • Exhaust pressure sensor adapter fitting

Installation Notes:

  • Designed for 2007.5-2018 6.7L Cummins trucks performing a 2nd-gen-position T4 turbo swap.
  • Requires emissions deletion; block-off plates included for the factory EGR ports on the manifold.
  • Aftermarket T4-flange turbocharger required (S400 frame compounds and similar). Does not fit factory HE351VE or HE300VG turbos.

Black High-Temperature Coating

DPS exhaust manifolds are finished with a high-temperature black ceramic coating designed to handle extreme heat and real-world diesel performance conditions. This coating is rated for sustained temperatures up to 1,400°F, helping reduce surface heat, improve durability, and maintain a clean appearance under normal operating conditions.

Please note: The black ceramic coating is rated for temperatures up to 1,400°F. If exhaust gas temperatures exceed approximately 1,470°F, the coating may discolor and shift to a gray appearance. This is a normal result of excessive heat exposure and does not affect the performance or structural integrity of the manifold. Warranty does not cover coating discoloration or finish changes due to high EGT conditions.

About the Manifold Joint Seal

Every DPS multi-piece manifold uses a hard, metal-to-metal press-fit seal at each joint, no gasket. The seal tightens through thermal expansion and performs best at driving temperatures (750°F and higher). Minor leakage at cold or idle is normal and expected on any joint-style manifold and is not a sign of a defective part.

Every manifold is pressure-tested leak-free at room temperature before it leaves our facility. For a full explanation of how the seal works, why soapy-water idle tests aren't a valid diagnostic, and how the multi-piece design outlasts single-piece manifolds, see:

Understanding DPS Multi-Piece Exhaust Manifolds →


Fitment

This T4 manifold fits 2007.5, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, and 2018 Dodge Ram 2500 and 3500 trucks with the 6.7L Cummins engine when upgrading to an aftermarket turbocharger with a T4 inlet flange.

This manifold will NOT fit the factory turbo. The factory HE351VE (2007.5-2012) and HE300VG (2013-2018) turbochargers use a T4i flange, not a T4. This manifold is for aftermarket T4-flange turbos only. For a stock replacement, see the T4i Manifold for 6.7 Cummins.

Need a different manifold?


Related 6.7 Cummins Products

Customer Reviews

You may also like