Close
You have no items in your shopping cart.
Search
RSS

Blog posts tagged with 'diesel blog'

What does the Turbonator® VGT fit?
The DPS Turbonator® VGT can be purchased as a full Turbocharger that will fit in a Cummins (12V, 24V, Common Rail or 6.7L), it can also be purchased as a full turbo kit that will allow the Turbonator® Turbo to be installed in a 6.0L Ford without lifting the body of the Ford truck. The DPS Turbonator® VGT Turbine Housing can also be used with your existing 300 or S400 (T3 or T4) turbo by simply replacing your old turbine housing with the Turbonator® turbine housing. Doing so will turn your S300 or S400 turbo into a VGT Turbo. The DPS Turbonator® VGT does NOT fit the stock Holset turbo that comes with the Cummins engine. The DPS Turbonator® VGT does NOT fit the stock Garrett turbo that comes with the 6.0L Ford. If you have an S400 2nd gen Swap, the DPS Turbonator® VGT Turbine housing will fit your existing S400 turbo. Adding the DPS Turbonator® VGT turbine housing will give your 6.7L Cummins close to stock turbo spool up. The DPS Turbonator® VGT is more accurately a VNT, is a variable nozzle turbocharger with several unique features. Similar to aerospace designs, its vanes are very thin aerodynamic stators, riding on centroid pivots, which are supported on both ends. Due to this design, a very high volume of exhaust can flow through when the stators are wide open with very little restriction. Having pivoting technology throughout the system instead of sliding technology reduces wear and friction among the moving pieces, which is extremely important in high soot environments. The Turbonator® design is based on years of computer flow model testing. This new design allows us to control the pressure, volume of exhaust and the angle of attack onto the turbine wheel, more efficiently than any design we’ve tested it against. The Turbonator® will spool up 200-400 rpm's faster than the same size journal bearing turbo and run extremely clean and efficient. It can come as a full Turbo or as just a turbine housing that will fit with S300 & S400 (T4 & T3) turbochargers. Email: sales@dieselpowersource.com Ph: 801-930-8404